Description
Slotted post infill Piece (2m 53x24mm) for Deck Balustrade Posts, Mi-T post end infill and commonly used when stepping a fence (see image). You will need one infill piece (2m x 50mm x 25mm) per section this will need to be cut to size, this fills the slot in the slotted post.
For use with Slotted Posts
Adding an infill piece hides the post slot that would otherwise be visible, allowing for a neater finish. This is common when a fence steps or when our slotted posts are used with balustrade panels.
For use with our Jakpost® Foot
Our Jakpost® Foot only works with intermediate posts. If the foot is installed at the end of a run, an infill piece is used to give the visual appearance of an end post. Slotting the infill into the post gap and hiding the post foot.
For use with Mi-T Posts
The infill piece is also required when a Mi-T Post is installed at the end of a fence run. It fills half of the ‘T’ post creating a neat finish.
Where possible, avoid cutting, drilling or notching any timber that will be in-ground, as per our 25 year Jakcure® terms and conditions. If occasional sections do have to be cut then Cut Treatment should be applied liberally.
There are no reviews yet.